Collision d'un planeur Standard Libelle avec des lignes électriques lors d'un atterrissage en campagne près de Küssnacht, Suisse
Le 6 mai 1972, un Glasflügel Standard Libelle a percuté des lignes électriques lors d'un atterrissage en campagne près de Küssnacht, Suisse. Le pilote avait décollé de l'aérodrome de Buttwil et a rencontré des thermiques insuffisants, ce qui a conduit à la décision d'atterrir dans un champ. Lors de l'approche, l'aile gauche du planeur a heurté une ligne électrique, causant d'importants dommages à l'appareil. Le pilote a subi des blessures légères, et les dommages aux tiers ont été minimes. Le rapport officiel attribue l'incident à une approche d'atterrissage insatisfaisante.
- Aerotow cross-country: The pilot aerotowed from Buttwil and then thermaled up to about 1400 m before gliding south of the Lindenberg in search of better lift.
- Weak thermals en route: Despite flying toward the Rooterberg and then Meggen under cumulus clouds, the pilot found no significant thermals and descended to about 1100 m MSL.
- Short, obstructed field: The pilot selected a roughly 180 m by 37 m mown field for an outlanding that was flanked on both sides by overhead power lines near Hinter-Barbrämen.
- High, misjudged approach: During the outlanding circuit at about 150 m AGL, the pilot turned onto final too early, resulting in an approach that was too high toward the short field.
- Tight corrective turn: To lose height, the pilot flew a full left 360 about 250 m before the field, but flew the circle poorly so the glider yawed and skidded left on rollout.
- Wing strikes power line: Still in a skid, the glider overflew houses and the left wing leading edge struck an overhead electrical line and insulator about 8 m above ground.
- Crash - minor injury: After briefly regaining level attitude, the glider impacted the ground hard around 1215, causing serious aircraft damage and minor injury to the pilot.