Accidente de un Standard Cirrus durante remolque aéreo en Benken resulta en fatalidad
El 14 de julio de 1983, un Schempp-Hirth Standard Cirrus estuvo involucrado en un accidente fatal cerca de Benken, Suiza. El planeador estaba siendo remolcado desde el aeródromo de Schänis cuando el cable de remolque se rompió a aproximadamente 200 metros de altitud. El piloto intentó saltar con un paracaídas pero resultó fatalmente herido ya que el paracaídas no se desplegó completamente antes del impacto con el suelo. El planeador fue destruido en el accidente, pero hubo daños mínimos en las áreas circundantes. El informe oficial confirmó que el accidente se debió a un salto en paracaídas desde una altura insuficiente después de la rotura del cable de remolque.
- Aerotow climb: The Standard Cirrus launched from Schänis on aerotow for a training flight and climbed normally toward the Schäniserberg in smooth conditions.
- Tow cable break: Approximately 2 km from Schänis at about 200 m above ground near Benken, the tow cable broke close to the weak link, abruptly separating the glider from the tug.
- Loss of control: Following the cable break, the glider deviated markedly from normal attitude and entered a steep, near-vertical or spiral descent, indicating loss of controlled flight.
- Pilot attempts bailout: The pilot did not jettison the canopy but opened his harness, pulled the parachute handle, and exited the glider during the steep descent.
- Parachute not deployed: The pilot’s parachute only partially deployed, with several line bundles still stowed, because the available height was insufficient for full opening.
- Crash - fatal: The glider impacted the ground in a shallow angle and was destroyed, and the pilot struck the ground nearby with a partially deployed parachute and was fatally injured.